Rode
- Rode VideoMic GO II Microphone
- Camera/USB directional microphone
- Polar pattern: Supercardioid
- Condenser shotgun microphone
- Transmission: 60Hz - 20kHz
- Connection: 3,5 jack
- integrated vibration mount
- 15dbA
- Limiting sound pressure level: 110 dB
- Self-noise: 15 dBA
- Sensitivity: 28.8 mV/Pa
- Output impedance: 2.2 kOhm
- Audio Interface: 2 In/2 Out (via USB)
- Digital conversion: 24 bit/48 kHz
- TRS connection cable
- incl. foam windscreen
- 3 m extension cable with TRS connectors
- suitable for VideoMic/-Pro Rycote
- Stereo VideoMic Pro use on the sound boom Micro Boompoole
- compact microphone
- Compact and lightweight (8 cm/42 g)
- Plug + Play - without battery
- Full metal housing (aluminum) with scratch-resistant ceramic coating
- HF shielding against interference
- Structure-borne noise decoupling thanks to Rycote®-Lyre® vibration mount
- Attachment to the camera via integrated standard hot shoe adapter
- 3/8" thread embedded in the base for tripod or boom pole mounting
- Connection cable with 3.5 mm TRS jack plug (double mono)
- Transmission range: 100 Hz - 20 kHz
- Sensitivity: 22 mV
- Self-noise: 20 dBA
- Maximum sound pressure level: 140 dB
- Rode WS12 Deluxe Fur Windscreen
- suitable for VideoMic GO II
- protects against noise during outdoor recordings
- up to approx. wind force 5
Free live consultation
Your individual consultation - from the comfort of your sofa
Arrange appointment- small and lightweight
- integrated TRRS plug for connection to the headset socket
- depending on the plug direction for audio recordings to the front or in selfie mode
- integrated 3.5 mm headphone jack for thomann monitoring during recording and playback
- 1/2" condenser capsule
- Transmission range: 100 - 20,000 Hz
- Sensitivity: 22 mV
- Self-noise: 20 dBA
- Maximum sound pressure level: 140 dB
- Rode Interview GO, handheld adapter
- to convert the Wireless Go module into a handheld microphone
- windscreen included
- fully integrated standalone device with intuitive operation
- 4 Neutrik combo inputs (XLR/6.35 mm) for microphones, guitars, bass and keyboards
- ultra low-noise Revolution(TM) high-gain preamps (+76 dB)
- Dual USB-C audio interface for simultaneous connection of 2 computers or mobile devices
- MFi-certified for digital connection of an iPhone
- Wideband Bluetooth for first-class voice quality and wireless monitoring
- 9 freely assignable channels for individual configuration of the mixer, 6 faders, 3 virtual faders
- assignable signal sources: 4x XLR/6.35 mm, Bluetooth, USB 1, USB 2, SMART Pad Audio
- 8 programmable SMART pads with 8 banks and 2 bank change buttons (for 64 actions)
- for triggering audio, effects, MIDI commands, mixer actions and vision switching
- 4 GB internal memory for SMART Pad audio
- Encoder with touch function for navigation and precise parameter settings
- professionally programmed channel presets and VOXLab(TM) Quick Editor
- APHEX signal processing: Aural Exciter, Big Bottom, Compellor
- High-pass filter, de-esser, noise gate, EQ, compressor
- Studio effects: Reverb, Delay, Pitch Shift, Robot Voice
- Mix-minus and ducking function
- Stereo and multitrack recording to microSD, USB storage device or computer
- Wi-Fi and Ethernet connection
- Aluminum telescopic fishing rod
- stepless length adjustment from 0.84 to 3 m
- Foam rubber handle
- simple latch mechanism
- well balanced
- Cable routing also possible on the inside
- Microphone
- ultra-compact and lightweight
- Directional characteristic: supercardioid
- high directivity to the front, angle of incidence approx. 45°
- Plug&Play - no battery required
- Full metal housing (aluminum) with scratch-resistant ceramic coating
- excellent shielding against interferences
- crystal clear, coloration-free sound with subtle presence enhancement
- innovative HELIX™ Isomount swing mount with hot shoe adapter
- integrated 3/8" thread for tripod or boom mounting
- analog 3.5 mm TRS output
- Rode Wireless GO II Single
- wireless microphone system with transmitter and receiver
- Wireless link
- ultra-compact wireless microphone system
- toll- and registration-free 2.4 GHz band
- TX transmitter with integrated microphone to clip on
- 2-channel receiver RX for clip-on or lightning shoe mounting
- Range: 200 m (free line of sight)
- internal LiPo battery
- Rode Podcaster MKII, white, USB speaker microphone
- professional, dynamic USB speaker microphone
- with heavy metal housing (610 g)
- dynamic cardioid capsule that is perfectly tuned to the sound of speech
- the capsule is installed horizontally, the podcaster is recorded from the front.
- Pop filter in the pickup basket
- Integrated USB audio interface
Omnidirectional lavalier condenser microphone, reinforced connection cable (1.2 m) with MiCon connector
Reliable clip-on condenser microphone with miniature capsule (4.5 mm), suitable for a wide range of applications, whether for television and radio, conferences, presentations, live on stage, at church services or for lectures of all kinds.
- Carbon Boompole Pro
- 0.81 - 3 m length
- Twist lock mechanism easy to extend with one hand
- suitable for use with professional directional microphones
- Rode RODECaster Duo podcast studio
- Audio production studio - extremely low noise
- 2 Neutrik combo inputs
- integrated wireless receiver
- 7 channels with 4 physical fibers
- 3 virtual faders
- Aphex audio processing
- 6 fully programmable smart pads
- 3.5 mm TRRS input
- Dual USB-C, Bluetooth
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Delivery time (from-to) working days after receipt of payment
The item is not in stock in our inhouse warehouse and will be ordered from the external warehouse/manufacturer or disributor after you have placed an order. The expected delivery time is listed with the item.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
We are happy to order for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Goods have been ordered. Long delivery time expected. Pre-order now and secure your place on the waiting list.
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.